Such as we have cupboards that help us keep some things together in our homes. The attachment of hinges on the cupboard doors is among the steps that are necessary when constructing a new cupboard or doing some renovation works. Hinges that are properly installed allow your doors to open and close easily, align correctly and serve for a very long time. This detailed review will take you through How to Put Hinges on a Cupboard Door and make sure that it is a professional job done.
Contents
Gather Your Tools and Materials
It is important to acquire the right tools and materials before installing hinges on a cupboard door. Here’s what you’ll need:
Cupboard door
The common types of these hinges are butt-hinges, Euro hinges, and concealed-hinges.
Appropriate screwdriver or drill and bit.
Screws
Pencil
Tape measure
Carpenter’s square
Chisel
Safety goggles
Dust mask
Choose the Right Hinge Type
The selection of the right hinge type should be an important consideration when it comes to your kitchen cupboard’s door. There are several things you need to consider when selecting a hinge, including the type of door materials, size of your door, and your personal aesthetics. Some common hinge types include:
Butt Hinges: These are traditional, visible hinges that install on outdoor surface of the wooden cupboard doors.
European Hinges: The concealed hinges are perfect for contemporary/frameless cabinets. It cannot be discerned by seeing when the door is closed.
Concealed Hinges: Designed to be invisible upon closure with their adjustment capabilities made, these hinges are ideal for a clean modern look.
The choice of a hinge type depends on the application project and thus the installation procedure.
Marking and Measuring
Before you begin setting up the hinges, you will have to survey and take the precise measurement of the door in a bid for its precision and perpendicularity. Follow these steps:
Set your open cupboard door on a horizontal and even area.
Locate where the hinge should be placed on the door. This will be determined by the hinge style you choose as well as your personal taste. Butt hinges are installed on common positions like the top and bottom of the door while European and concealed hinges are fitted in concealed positions.
Using a tape measure and pencil, mark the hinge location on the door. Make sure the marks are equal, square and level with each other.
Mark lines using a carpenter’s square across the door where the hinge knuckles are supposed to sit to make sure that they are perfectly aligned. It will show them how to install while doing so.
Prepare the Cupboard Frame
In addition, you must ready the cupboard frame when fitting hinge plates on a new cupboard. Here’s how:
Place the door in the cupboard opening position you would prefer it to occupy while closed.
Using a pencil, indicate where the plates of the hinge will be attached on the frame. Verify that these marks match with the door’s hinge points.
Remove the cupboard door and then fix the hing plate to the cupboard frame using a screwdriver or a driller. Ensure that they are properly fastened, secured, and balanced.
Install the Hinges
You should place the hinges on the door at this point. Here’s how to do it:
For Butt Hinges:
Place the hinge on the door and frame and align it with the previously marked areas.
First, fasten the hinge to the door using a screw driver or drill and screws. Finally, affix the other side of the hinge onto the cupboard frame.
Make sure that you test the door to see whether it opens and closes easily. If need be, reposition the hinges in order to make any changes.
For European Hinges:
Attach the mounting plates to the door and cupboard frame using the manufacturer’s installation procedure.ICENSE:THE FREE LICENSE The plates play an important role in European.
Affix the mounting plates in place before fixing the hinge cups onto the door and the frame by fitting them on the plates. Ensure that they are properly aligned.
Adjust the flow of the door and make sure it works correctly.
For Concealed Hinges:
As directed by manufacturer’s instruction on concealed hinge location; mark and measure the door and frame.
Drill with appropriate Forstner bit for the hole of the hinge cup in door and frame. They should be drilled according to the specified depth and angle as dictated in the instruction manual.
Connect hinge cups on the door edge fitting in the previously drilled holes.
Check if the door operates properly and rectify adjustments.
Fine-Tuning and Alignment
Then the door must be aligned properly and properly operated once the hinges have been attached. Here’s what to do:
Ensure that the door aligns in a manner such that it fits the cupboard frame at every point. You will have to change the alignment of a hinge slightly in case its not set up correctly.
If the hinges can be adjusted, make an adjustment of the tensions. This will help maintain a tight shut and prevent an accidental opening of the door.
Move the door up and down several times to test its functionality. Adjust the hinge positions further if necessary for the smooth operation of the door.
Make sure all the screws are secure but do not tighten too much; otherwise you destroy it!
Safety Precautions
Make a point of using caution while working on your cupboard door. Follow these safety precautions:
To ensure that no dust, metal shaving, and wooden particles hit on the eyes, wear safety goggles.
Dust mask should be used while drilling or chiseling the stone in order not to inhale dust particles.
Ensure good posture and lifting procedures to prevent strain or injury.
Maintain a work area that is clean and organized so as not to cause accidents.
Conclusion (How to Put Hinges on a Cupboard Door)
Attaching hinges on a cupboard’s door may sound complicated, but when you have the right materials, tools and plan your work correctly, this is achievable do-it-yourself job. This section contains a step-by-step guide on how to replace your cupboard doors and get professional results that will work smoothly with no problems for decades. Choose the correct kind of a hinge; measure correctly, draw lines precisely and adjust every detail as it should be so that your cupboard will look perfect. However, it is advisable to apply lots of patience and a keen eye on details when assembling these doors so that they can add an interesting functionality in your cupboard door.
FAQs: How to Put Hinges on a Cupboard Door
Q1: What kind of hinge is suitable for my cupboard door?
A1: Your selection of a hinge type will depend upon your door material; size and style likes. There are three main categories of hinge types namely the butt hinges, the European hinges, and the concealed hinges. For instance, butt hinges are perfect when you have wooden doors while European and concealed hinges provide a more contemporary, concealable look.
Q2: What do I use to ensure that my cupboard door sits squarely on the frame properly?
A2: It is important for you to accurately measure both the door itself and its frame prior to your placement of hinges to allow good alignment. Ensure that the hinge is placed at a horizontal position using a carpenter’s square. Then adjust on finetuning of aligned after installing hinge can do small changes.